Product Description

Top QualIty Figure Model Rapid Prototyping Manufacturer /SLA SLS 3D Printing Service

Material Resin 9400 Imported Resin 8000 Transparent Resin High Tenacity Resin Yellow HTR Grey HTR Black Nylon PA12
heat distortion temperature (0.46MPa)  46  46  47  38-50  70  99.6  173
Min Wall Thickness  0.6mm  0.6mm  0.6mm  0.6mm  0.6mm  0.6mm  0.5mm
Min Hole Diameter  1mm  1mm  1mm  1mm  1mm  1mm  1.2mm
Materal Hardness (Shore D)  79  79  87  85  80  85  86
Extension Strength (Tensile)  47MPa   47MPa   50MPa   38-56MPa   48MPa   40-44MPa   50MPa
Extension Strength (Fracture)  33-40MPa   33-40MPa  56MPa  60MPa   56MPa   52MPa   70MPa
Bending Strength  67MPa  67MPa 84MPa  69-74MPa  68MPa   64-69MPa   75-80MPa
Bending Modulus(MPa)  2178-2222  2178-2222  2490  2692-2775  2300  2900-3200  2800
Printing Height  0.1/0.05  0.1  0.1 0.1  0.1  0.1  0.1
Printing Error Range  3/1000  3/1000  3/1000 3/1000  3/1000  3/1000  2.5/1000
Moisture Absorption  4/1000  4/1000  4/1000  4/1000  4/1000 4/1000  
Impact Strength  23-29J/CM   23-29J/CM  25J/CM  45-29J/CM  33J/CM  34.4J/CM  2.7KJ/CM

Top QualIty Figure Model Rapid Prototyping Manufacturer /SLA SLS 3D Printing ServiceTop QualIty Figure Model Rapid Prototyping Manufacturer /SLA SLS 3D Printing Service


深圳沃优达科技有限公司 粤ICP备16123490号