中文

ENGLISH

 
News
How does SLA work?
Release time:2021-10-11

The build platform is first positioned in the tank of liquid photopolymer, at a distance of one layer height for the surface of the liquid.

 

Then a UThe build platform is first positioned in the tank of liquid photopolymer, at a distance of one layer height for the surface of the liquid.

The build platform is first positioned in the tank of liquid photopolymer, at a distance of one layer height for the surface of the liquid.
 
Then a UV laser creates the next layer by selectively curing and solidifying the photopolymer resin. The laser beam is focused on the predetermined path using a set of mirrors, called galvos. The whole cross sectional area of the model is scanned, so the produced part is fully solid.
 
When a layer is finished, the platform moves at a safe distance and the sweeper blade re-coats the surface. The process then repeats until the part is complete.
 
After printing, the part is in a green, no-fully-cured state and requires further post-processing under UV light if very high mechanical and thermal properties are required.
 
 
The liquid resin is solidified through a process called photopolymerization: during solidification, the monomer carbon chains that compose the liquid resin are activated by the light of the UV laser and become solid, creating strong unbreakable bonds between each other. The photopolymerization process is irreversible and there is no way to convert the SLA parts back to their liquid form: when heated, they will burn instead of melting. This is because the materials that are produced with SLA are made of thermoset polymers, as opposed to the thermoplastics that FDM uses.
 

Then a UV laser creates the next layer by selectively curing and solidifying the photopolymer resin. The laser beam is focused on the predetermined path using a set of mirrors, called galvos. The whole cross sectional area of the model is scanned, so the produced part is fully solid.

The build platform is first positioned in the tank of liquid photopolymer, at a distance of one layer height for the surface of the liquid.

The build platform is first positioned in the tank of liquid photopolymer, at a distance of one layer height for the surface of the liquid.

 

Then  UV laser creates the next layer by selectively curing and solidifying the photopolymer resin. The laser beam is focused on the predetermined path using a set of mirrors, called galvos. The whole cross sectional area of the model is scanned, so the produced part is fully solid

When a layer is finished, the platform moves at a safe distance and the sweeper blade re-coats the surface. The process then repeats until the part is complete.

 

After printing, the part is in a green, no-fully-cured state and requires further post-processing under UV light if very high mechanical and thermal properties are required.

 

 

The liquid resin is solidified through a pss lled photopolymerization: during solidification, the monomer carbon chains that compose the liquid resin are activated by the light of the UV laser and become solid, creating strong unbreakable bonds between each other. The photopolymerization process is irreversible and there is no way to convert the SLA parts back to their liquid form: when heated, they will burn instead of melting. This is because the materials that are produced with SLA are made of thermoset polymers, as opposed to the thermoplastics that FDM uses.Then a UV laser creates the next layer by selectively curing and solidifying the photopolymer resin. The laser beam is focused on the predetermined path using a set of mirrors, called galvos. The whole cross sectional area of the model is scanned, so the produced part is fully solid.

 

When a layer is finished, the platform moves at a safe distance and the sweeper blade re-coats the surface. The process then repeats until the part is complete.

 

After printing, the part is in a green, no-fully-cured state and requires further post-processing under UV light if very high mechanical and thermal properties are required.

 

 

The liquid resin is solidified through a process called photopolymerization: during solidification, the monomer carbon chains that compose the liquid resin are activated by the light of the UV laser and become solid, creating strong unbreakable bonds between each other. The photopolymerization process is irreversible and there is no way to convert the SLA parts back to their liquid form: when heated, they will burn instead of melting. This is because the materials that are produced with SLA are made of thermoset polymers, as opposed to the thermoplastics that FDM uses.When a layer is finished, the platform moves at a safe distance and the sweeper blade re-coats the surface. The process then repeats until the part is complete.

 

After printing, the part is in a green, no-fully-cured state and requires further post-processing under UV light if very high mechanical and thermal properties are required.

 

 

The liquid resin is solidified through a process called photopolymerization: during solidification, the monomer carbon chains that compose the liquid resin are activated by the light of the UV laser and become solid, creating strong unbreakable bonds between each other. The photopolymerization process is irreversible and there is no way to convert the SLA parts back to their liquid form: when heated, they will burn instead of melting. This is because the materials that are produced with SLA are made of thermoset polymers, as opposed to the thermoplastics that FDM uses.V laser creates the next layer by selectively curing and solidifying the photopolymer resin. The laser beam is focused on the predetermined path using a set of mirrors, called galvos. The whole cross sectional area of the model is scanned, so the produced part is fully solid.

 

When a layer is finished, the platform moves at a safe distance and the sweeper blade re-coats the surface. The process then repeats until the part is complete.

 

After printing, the part is in a green, no-fully-cured state and requires further post-processing under UV light if very high mechanical and thermal properties are required.

 

 

The liquid resin is solidified through a process called photopolymerization: during solidification, the monomer carbon chains that compose the liquid resin are activated by the light of the UV laser and become solid, creating strong unbreakable bonds between each other. The photopolymerization process is irreversible and there is no way to convert the SLA parts back to their liquid form: when heated, they will burn instead of melting. This is because the materials that are produced with SLA are made of thermoset polymers, as opposed to the thermoplastics that FDM uses.

Previous:5 Axis eva foam for car cnc machining prototype
Next:Discussion on 3D Printing Materials and Their Safety

Design

Prototype

Low Volume Production

Mold

Production

Contact