中文

ENGLISH

 
News
HOW TO CHOOSE MATERIALS FOR PLASTIC PROTOTYPES
Release time:2018-08-30

1.Transparent product prototype: You can choose transparent PC, PMMA (Acrylic). This prototypes which is made from these material are very transparent after high quality polishing.

 2.Wear-resistant product prototypes: You may choose PA or POM. But the material  can not be glued together from two separate parts, the prototype need be made by whole body.

3.High toughness product prototypes: You can be selected PP or PA. But the material also can not be glued together from two separate parts, the prototype need be made by whole body.

4.High temperature resistant product prototypes, You can choose material bakelite, PC, epoxy resin, PA (nylon). These materials can not be glued except the PA, the prototype need be made by whole body.

5.Commonly product prototypes, It usually selects ABS material, There is very easy to processing for this kind of material, It is very good after hand polishing.

材料图

 

Vowin Prototype is dedicate to vowin.cn' target='_blank'>rapid prototyping for 10 years, we have rich experience for vowin.cn' target='_blank'>rapid prototyping service, we can provide the suitable solution with CNC machining, 3D printing, Silicone Mold Vacuum Casting, Rapid tooling according to your drawing and requirements, and make your idea be prototype in few days, it can save the cost and time for you.

Previous:UV SPRAYING — SURFACE TREATMENT OF RAPID PROTOTYPING
Next:WHY THE ALUMINUM ANODIZING PRODUCTS ARE POPULAR IN THE CNC MACHINING INDUSTRY?

Design

Prototype

Low Volume Production

Mold

Production

Contact