中文

ENGLISH

 
News
Optical Prototype Machining
Release time:2023-02-09

Optical Prototype Machining

Vowin-PROTOTYPE can provide a one-stop vowin.cn/en/News/news1251.html' target='_blank'>machining service for the automobile lighting prototype. Of course, we have a large number of cases to follow. Years of experience in automotive lighting prototype vowin.cn/en/News/news1251.html' target='_blank'>machining to ensure that we can provide you with the highest standard automotive lighting prototype machining services. We have many sets of machining plans, from design of automobile lighting, headlamp, taillight, fog lamp, to the  test of the photometric development engineering. It is a relaxing and pleasant thing for us.



Optical-Prototype-Machined




Would you like to request for quote for free ?
if yes,submit your 3D drawings as well as requirements and contact us by email

crytal@vowin.cn  after checking all the details
we will get back to you about quote in details within 3 hours.


 

Optical Prototype Machining

 



In industrial applications, many machines have this strict requirement for clear optical components, such as car lighting, automobile industry (signal lighting equipment, dashboard, etc.), medical industry (blood storage container, etc.), industrial applications (DVDs, light scatters), and key electronic products (especially transparent).The processing of high quality optical parts has a higher demand for manufacturers, operators, machining equipment, and knowledge reserves. Fortunately, AN-PROTOTYPE is a good one of the prototype manufacturers with clear optical components, we pay special attention to the processing the details of optical parts, without any marks or scratches.




Would you like to request for quote for free ?
if yes,submit your 3D drawings as well as requirements and contact us by email
crystal@vowin.cn ,after checking all the details
we will get back to you about quote in details within 3 hours.

Optical Prototype



 

PMMA Prototype Machining

PMMA prototype machining is one of the main businesses of AN-PROTOTYPE. We know well about clear optical prototypes, without any traces or scratches after processing. In the process of PMMA machining, our flexible and diverse work methods and work plans enable us to fully support PMMA prototype projects. For example, Peter, a car prototype designer from canda, said to us that AN-Prototype is a great prototype manufacturer, full of service to me, and the manufacture of the car ligths has realized my dream for many years.



Automobile lighting prototype


 

Acrylic Polishing

 



Acrylic resin is a good light permeable material, which has the characteristics of crushing, weathering, UV stability, stable size, good heat insulation performance and good thermal stability. CNC acrylic polishing process needs to remove excess materials and obtain good finish before polishing. AN-PROTOTYPE used the skilled craftsmen to use polished ointment to polish the archetypal surfaces according to the requirements of different polishing grades, and to leave high quality polishing effects, which can be applied to windows, signs and lighting devices, and supplies with almost undistorted clarity.



Automobile lighting prototype


 

Polycarbonate Prototype Polishing


Polycarbonate is one of the most common transparent plastics, and its definition is only next to acrylic acid. The processing of polycarbonate is usually done by vapor polishing. vapor polishing is an ideal method for polycarbonate polishing. It can improve the internal and external surface polishing of polypropionate prototype. It can remove slight scratches and irregular shape particles, and use chemical reaction to corrode the surface of plastic to achieve smooth. In the process of vapor polishing, rich experience is one of the keys. Fortunately, Vowin-PROTOTYPE fully grasps this technology.

Usually, Methylene chloride vapor is used to polish polycarbonate. Methylene chloride  generates steam when heated to boiling point and exposes the polycarbonate prototype in steam less than three seconds in a dust-free room. In the process of polishing, the polycarbonate prototype must be dry, and special equipment is needed to achieve the desired results. Only the experienced mechanic can operate, otherwise the situation will become very bad, and the appearance will appear white foggy texture.


Optical-Prototype-Machining

Previous:Custom Parts Machining Factory Worldwide
Next:Robotics Parts CNC Machining prototype

Design

Prototype

Low Volume Production

Mold

Production

Contact