The processing method of large-scale aluminum alloy precision parts is also simple. The first method of clamping large-scale Aluminum alloy parts processing is reasonable. The flying knife can be used as much as possible. The flying knife is easy to cause the workpiece to generate heat and deformation, so it is necessary to do the front and back to prevent deformation and thickening. After roughing, the planes of the two faces should be leveled to ensure that the workpiece is vertical and then the light knife is made. The thickness margin should be sufficient to ensure that there is a possibility of remediation if there is an abnormality during processing.

3D printing technology is also known as additive manufacturing technology, or additive manufacturing and incremental manufacturing technology. The American Society for Testing and Materials has clearly defined 3D printing technology, and 3D printing technology is very different from current traditional processing methods. This technology is a layer-by-layer process for materials using 3D CAD forming technology. It is a three-dimensional physical solid model processing method using direct manufacturing and 3D model technology. 3D printing technology includes rapid prototyping in material processing and rapid manufacturing associated printing processes in the production process.

3D printing service is a common name for additive manufacturing technology. It is a technology that uses discrete materials to build objects layer by layer based on 3D CAD design data. Compared with traditional material removal methods and material forming methods, 3D printing is a bottom-up material accumulation manufacturing process. It has been gradually developed since the 1980s. It is also called 3D printing technology such as rapid prototyping and layered manufacturing. The development and maturity is one of the important signs of the third industrial revolution.

Many times, I will encounter some large aluminum alloys. If the aluminum alloy is low in hardness, it will be easily deformed after processing. If some large Aluminum alloy casing parts are encountered, in order to prevent it from deforming, it is necessary to prevent deformation before opening and roughing. The outline structure is roughly opened, and then the front and back surfaces are flattened to make it vertical and then the machine is used to make the front and back sides of the light knife. If the side wall of the workpiece is very thin, it must be heat-hardened before the machine is placed. It can also be left in the thickness according to the structure of the workpiece. Then the verticality of the parallelism of the workpiece is straightened and the entire plane of the workpiece is brushed. It is also possible to solve the problem of workpiece deformation.

Point contact type: The so-called point contact type processing refers to the processing method of point contact molding during processing, such as spherical milling cutter machining, spherical grinding wheel grinding in 5-axis machining service, etc. The main feature of this processing method is: spherical The surface normal vector points to the whole space, and it has the ability to adapt to the surface normal vector. Compared with the line and surface contact processing, the programming is simpler and the calculation amount is smaller, and the tool radius is less than the minimum curvature of the surface. 5 radius to avoid interference. Therefore it is suitable for the processing of arbitrary surfaces

Aviation parts are products with high precision and processing difficulty. Half of them are produced by 5-axis CNC machining. First, the materials for aerospace parts must be good because they involve many factors such as pressure and temperature in the air. It is necessary to consider that there must be no problems when using it. Therefore, it is necessary to use suitable materials for processing before processing. Before the processing, the material should be inspected without the appearance of fine holes and some undesirable phenomena to ensure the quality of the material.

It is a casting process for elastomers using a vacuum to draw the liquid material into the mold. The process starts by placing two pieces silicon mold in a vacuum chamber . The raw material is mixed and degassed and then poured into the mold .Firstly, a master model is made by CNC or SLA and polished to the final surface finish of the part for Silicone Rubber Mold making.

DMU65/50 5-Axis CNC Machining Centre is developed and applied not only for some large workpieces with complex surfaces and special requirements, but also for improving the processing, quality and efficiency of these surfaces. Bole has 12sets DMU65 and DMU50 multiple-Axis machines, this type machine is a high-tech and high-precision process tool, specially they are used to process complex surfaces.

When your project requires a production-quality prototype part, look no further than Rapid Prototyping Machining services. We use those manufacturing methods, such as CNC machining, CNC turning, and 3- axis,4axis and 5-axis milling,sheet metal assembling,rapid tooling,injection molding and 3D printing, we can turn your design into a featured prototype in as little as 1-7 days. On time delivery, machined prototypes can be used for form studies, fit-checks, functional testing, and marketing testing.

We provide a range of high-quality 3D printing (additive manufacturing) services, including FDM, SLA, SLS and SLM. This allows for the 3D printing of plastics and metals, and provides options for both prototyping and batch production.

Our plastic injection molding process produces from prototypes to mass production plastic parts in 15+ days.

This is a data sheet of 3D printing service using,similar as ABS raw material. When you want to print a ABS plastic part,this raw material is the best one to instead of it. Somos 14120 Product Data Sheet-Compare with ABS raw material Description DSMs