ProtoTools Low-Volume Injection Molding PROJECT A 10 week time line to deliver 23 tools and 200 sets of parts to client for testing before full production tooling can be committed too. ISSUE After review only some minor changes are recommended to cli

PROJECT – Fabricate low-volume tooling and deliver 30 overmold parts to client for testing using the same material that will be used in eventual high-volume production tooling.

Vowin grown up in the industry applying a hands on approach to precision injection molding. We offer complete project management services that leverage our years of experience manufacturing products for a wide array of applications. This vast knowledge base allows us to make materials selection, facilitate parts sourcing, as well as complete product development.

After prototype approved, Vowin will provide the detailed DFM report to you for conformation and then design the mold 3D drawing.

Communicate your ideas with our sales and engineers and get your design sketches. Our product engineers will give you the 3D models.

In addition to the injection molding machine, the process of injection molding requires not only the engineer to effectively control each plastic injection molding processing, but also the injection molding engineer to be able to master the use of the injection mold.

Injection molding process is a manufacturing process used to make plastic injection molded parts. It is a popular manufacturing method because it is efficient and can produce large quantities of parts quickly.

The price of injection molding is very cheap for high volume production, the price can be controlled at 0.01USD or even lower, depending on the size of the product, and the number of cavities of the mold.

Injection molds are a key part of the manufacturing process. They are used to produce a variety of products, from automotive parts to toys and even kitchen appliances.

Reverse engineering is to obtain the point cloud data of the physical model by using the three-dimensional digital scanning of the existing physical model in the case that the design drawings are incomplete or even without the design drawings or CAD models, and the point cloud data is calculated and used. Processing is done to form a digital model for product redesign and CNC machining. A reverse engineering process includes two steps: the first step is to scan the physical model and the second step is to creat a three-dimensional model.

The vacuum casting technology which uses prototype (SLA laser rapid prototyping piece, CNC products) to make silicone mold under vacuum, and is poured under vacuum conditions, such as PU, ABS, etc. Vacuum casting is also used to clone the prototype or copy the piece. It has different types including vacuum mould casting, vacuum pressure casting, vacuum sand casting and so on. This method is especially suitable for small batch production. It is a low-cost solution to solve experimental production and small batch production in a short time, and can also meet the functional test proofing of some structurally complicated engineering samples.

Sheet metal processing or sheet metal fabrication includes: folding, shearing, punching, welding, riveting, splicing and other processes. In general, the process of forming a sheet by hand or mechanical is called sheet metal processing. Sheet metal processing is to cut and bend metal materials into various shapes and their thicknesses can vary significantly. According to the materials, sheet metal fabrication can be divided into several types, including aluminum sheet metal fabrication, stainless steel fabrication and brass fabrication.