Start Your Free Project Review

Resources

4 Simple Tips for Problem-Free Injection Molding

4 Simple Tips for Problem-Free Injection Molding

When designing a part to be injection molded, you do not need to be an expert. Most molding issues we encounter could have been avoided by following four general guidelines.

Read More
How Can You Save Money on Your Next Molding Project?

How Can You Save Money on Your Next Molding Project?

When you are ready to move your product to production, one of the last things you want is to have unexpected costs suddenly emerge.

Read More
What FDM Part Density is Best for You?

What FDM Part Density is Best for You?

When printing Fuse Deposition Models (FDM) models, we can adjust the build density of the parts. This is very beneficial for you because the parts can be better tailored to your needs. Below are the three different densities that can be printed, and how they will be effective.

Read More
What is the Difference Between High and Normal SLA Resolution?

What is the Difference Between High and Normal SLA Resolution?

We are often asked what options one has in SLA resolution. The answer is simple, normal resolution and high resolution. And deciding which option is best for you is simple as well. Normal resolution prints parts at .005” layers, and high resolution prints parts at .002” layers.

Read More
What’s the Benefit of Metal-to-Plastic Conversion? Part II

What’s the Benefit of Metal-to-Plastic Conversion? Part II

As the old saying goes, Its hard to teach an old dog new tricks-Like converting metal parts to plastic. We discussed in our last blog, when done properly, parts converted from metal-to-plastic benefit from: Cost reduction Improve functionality Design

Read More
3 Things About 3D Printing Bureaus You Should Know

3 Things About 3D Printing Bureaus You Should Know

When you need to 3D print parts, you can either invest and utilize your own equipment, or order parts through a 3D printing bureau. But, how do you know when it is best to leverage the 3D printing processes of a service provider compared to in-house capabilities? Below are the top 3 reasons why customers have utilized a service bureau, like us.

Read More
When it’s Best to Choose Urethane Molding

When it’s Best to Choose Urethane Molding

Urethane molding is used mainly for prototype, bridge, and lower volume production runs. The process by which urethane—or, polyurethane—molding is done is similar to other types of manufacturing such as injection molding. The big differences come in the overall cost and cycle time as urethane molding is a type of soft tooling manufacturing method rather than hard tooling.

Read More
Carbon: The Ultimate Tool in the Additive Manufacturing Tool Belt

Carbon: The Ultimate Tool in the Additive Manufacturing Tool Belt

Material Properties. Part Design. Part Finish. Economics. Lead Time. Pick Two. That is how most projects go in Additive Manufacturing. It is very rare in the AM world where you can have your cake and eat it too. That is why the University of Adelaide Project is so special.

Read More
5 Things Engineers Need to Know About Digital Light Synthesis (DLS)

5 Things Engineers Need to Know About Digital Light Synthesis (DLS)

As an engineer, you’re always looking for new and better solutions for your design projects. You’ve likely experimented with traditional additive or 3D printing to produce models and prototypes. Besides being slow, the surface finish and mechanical properties are often suspect. But have you tried the newest innovation in 3D printing? Digital Light Synthesis (DLS)!

Read More
How 3D Printing with Stereolithography is Helping Launch a new Surgical Navigation Technology

How 3D Printing with Stereolithography is Helping Launch a new Surgical Navigation Technology

Some of us learn by simply reading from a textbook, others learn by hearing directions aloud, but many of us learn from hands-on exposure to a task or concept presented to us.

Read More
8 Questions to think about when choosing your Injection Mold Tooling

8 Questions to think about when choosing your Injection Mold Tooling

Injection Molding is one of the most common ways to manufacture your product in production. The first step is choosing a tooling option that works for your project. Here are 8 questions from actual customers that will help make it a little easier to choose your Injection Mold Tooling.

Read More
What’s the Difference Between Soft and Hard Tooling?

What’s the Difference Between Soft and Hard Tooling?

Different molding processes require different types of tooling. It is important to utilize the correct process so that you receive properly functioning parts. The two most commonly used molding processes are urethane molding, and injection molding

Read More
Home Previous 1 2 3 4 5 6 7 8 9 10 11 Next Last Total 64 Page 766 Records
We Chat: Crystal
We Chat: Crystal
We Chat:  Miko
We Chat: Miko
We Chat: Phil
We Chat: Phil

Get In Touch or Get A Quote

+86-755-29981960 Moble,What's app, Wechat: (+86) 18565691928 Rfq@vowin.cn

Please place file(s) for transfer in the same folder and ZIP or RAR before attaching. Larger attachments can take a few minutes to transfer depending on your local internet speed :) For attachments over 20MB, click wetransfer and send to Rfq@vowin.cn.
深圳沃优达科技有限公司 粤ICP备16123490号